Welcome to another tutorial, in this tutorial, I’m unboxing the Ettron Robotic and electronic starter kit; for kids, teenagers and the absolute beginner. This starter kit which may as well be seen as Arduino, Robot and electronic starter kit, contains the necessary electronic and robotic parts, which are suitable for teaching kids, teenagers and the absolute beginner, how to make programmable electronic circuits and robotics using the Arduino microcontroller unit, mechanical parts, sensors and some other electronic components and accessories.
TO BUY THE STARTER KIT, SEE DETAILS AT THE END OF THIS ARTICLE.
This kit is a must have, for tech enthusiasts who wish to make simple Electronic and Robotic stuffs and automate things. It is a good starter kit to introduce kids and teenagers to STEM education. It is a good kit, to introduce the basics of Robotics, Electronics and Arduino programming to primary and secondary schools; especially for schools in Nigeria, which is where this very kit can easily be purchased from us.
Why you should buy the Ettron Robotic and Electronic starter kit
There are several Arduino, robotic and electronicstarter kits out there; which contain some of the parts that are found in the Ettron robotic and electronic starter kit, but there are some reasons why you should consider buying the Ettron robotic and electronic starter kit, some of them are listed below:
- Once you buy the Ettron Arduino, Robotic and electronic starter kit, you will not have to bother yourself on what next to do, or how to use the kit. We regularly upload both written and video tutorials and lessons on how to use the starter kit to make projects. What this means is that you will never run out of projects to do, and you will always have a guide on how to make the projects. both at home and in the school.
- We provide you with technical support if you encounter any challenge when using the Ettron Arduino, robotic and electronic starter kit. You can reach us via WhatsApp or email during work hours to help you resolve technical issues with projects you make with the starter kit. If need be, we can schedule a one-on-one online tutorial to assist with the difficulties you encountered using our starter kit.
- We make sure that the parts we sell to you are in good condition before shipping, and we take the extra step of soldering some parts for you, which you will normally get unsoldered, if you did not buy the Ettron robotic and electronic starter kit. Part like the 16×2 Liquid crystal display comes with no header pins soldered, but we solder the header pins for you, before packing the starter kit.
- You will join interacting with our online community on WhatsApp, YouTube, LinkedIn, Facebook, etc. as this will enable you be updated whenever we upload new videos and written tutorials.
Content of the Ettron Robotic and Electronic starter kit
The starter kit contains 27 different parts as listed below:
Arduino Uno board x 1
Arduino USB cable x 1
SG90 servo motor x 1
Robotic gripper parts x 1
Battery connector x 1
Breadboard x 1
LED (Red, Yellow, Blue, Green, White) x 20
RGB LED x 1
Jumper wires (Male-Male, Male-Female, Female-Female
Photoresistor (Light emitting diode, LDR) x 2
Ultrasonic sensor x 1
Tilt sensor x 1
Passive infrared sensor (PIR) x 1
Resistors (220Ω, 1kΩ, 12kΩ, 100kΩ) x 40
7 Segment display x 1
Infrared remote-control x 1
Buzzer x 1
2N2222 Transistor x 2
Infrared receiver x 1
Tact switch x 3
16 x 2 LCD display with male header pins soldered x 1
9V Battery x 1
Flame sensor x 1
5k Potentiometer x 1
Star screw driver x 1
Radio frequency transmitter and receiver x 1
Laser diode x 1
How to get the Starter kit
TO BUY THE STARTER KIT, PLACE ORDER VIA:
Consider buying the Ettron Robotic and electronic starter kit today, and enjoy practical STEM education.
First tutorial/lesson for the Starter kit:
Arduino Robotic gripper with a potentiometer
